How to setup Minimal ADB and Fastboot Tool (Latest) Guide

Minimal ADB Fastboot Tool (Latest) can be used to run a command on the android device after setting it on fastboot mode. This tool can also be used as minimal adb and fastboot. It is not application it is command line CMD library after using this are some predefined command in the Android phone.

How to setup Minimal ADB Fastboot Tool (Latest) Guide

How to setup Minimal ADB and Fastboot Tool (Latest) Guide

It is a tool to use in command line operation android operating system.


Step 1: Download Minimal ADB and Fastboot

You can download the latest version of Minimal ADB and Fastboot from trusted sources:

Ensure download the installer (.exe) file suitable for your system.


Step 2: Install Minimal ADB and Fastboot

  1. Run Installer: Double-click on downloaded .exe adb minimal to launch the setup.
  2. Follow Installation: Choose preferred installation directory. For easy, you might install it to the Desktop or the default location (C:\Program Files\Minimal_ADB and Fastboot).
  3. Create a Shortcuts: Opt to create Start Menu folder or desktop shortcut to easy use.
  4. Complete the Installation: Click ‘Install’ wait for the process to finish. after done, we can launch the tool from the Start Menu or desktop’s shortcut.

Step 3: Enable USB Debugging on Android Device

  1. Activate the Developer Options:
    • Go to Settings > About Phone.
    • Tap 5 times on Build Number until you see the confirming message Developer Mode is enabled.
  2. Enable the USB Debugging option:
    • Go back to Settings > Developer Options.
    • Scroll down at bottom and toggle button on USB Debugging.

This setup will allows a PC to communicate with Android device via ADB connection.


Step 4: Connect Android Device USB cable & Verify the Connection.

  1. Connect via USB Cable: Use USB data cable to connect your Android device to the PC.
  2. Launch the Minimal ADB and Fastboot: Open tool using the shortcut you created on desktop.
  3. Verify the Connection:
    • In command window type: adb devices
    • You should see your device’s serial number here, indicating successful connection.
    • If a prompted on the device, allow USB debugging access.
  4. Some minimal adb fastboot commands
    • to check connected device  – devices.
    • adb push.
    • adb pull.
    • To reboot the device – adb reboot.
    • To reboot from recovery and bootloader use – adb reboot-bootloader and adb reboot recovery.
    • Connect the device to fastboot mode use – fastboot devices.
    • To unlock Fastboot OEM use  – fastboot OEM unlock.
    • To open shell terminal – adb shell.
How to setup Minimal ADB and Fastboot Tool (Latest) Guide
Avatar for Pangu

About Pangu

mobile software engineer with over 8 years of hands-on experience in firmware flashing, software repair, and mobile unlocking. Since 2017, I have authored, tested, and published numerous article and tutorials About Me: https://pangu.in/about-me/

View all posts by Pangu →

16 Comments on “How to setup Minimal ADB and Fastboot Tool (Latest) Guide”

Leave a Reply

Your email address will not be published. Required fields are marked *