XTC 2 Tool for HTC frp bypass tool download

To bypass FRP on HTC devices using XTC 2 Tool (Non Plug & SIM method), follow these steps carefully. This method uses the XTC 2 Clip Tool or XTC 2 Dongle, which is a specialized tool for HTC phones, even if the phone does not have a SIM inserted or doesn’t support Plug/Sim unlock.

⚠️ Important Note: This is only for educational and authorized service purposes. Bypassing FRP on stolen devices is illegal.


XTC 2 Tool for HTC frp bypass tool download

✅ Requirements:

  • HTC device with FRP lock
  • XTC 2 Tool with SmartCard / Dongle
  • XTC 2 Clip or latest XTC 2 Tool software
  • USB Cable
  • Windows PC
  • Internet connection

📥 Step 1: Download and Setup XTC 2 Tool

Downloadhttps://xtc-2-clip.com/xtc-2-clip-tool-v.1.29/

  1. Download and install the latest XTC 2 Tool drivers and software on your PC.
  2. Install HTC Sync Manager or original HTC USB drivers.
  3. Connect XTC 2 Dongle or Clip to the PC.

🔧 Step 2: Enable ADB Mode

If the phone is FRP locked, it usually disables ADB. You must:

  • Use Emergency Dialer Code or other tricks (like Language > Add Keyboard > Share via Gmail > Settings access) to get into Settings > Developer Options > Enable USB Debugging
    OR
  • Use the XTC 2 Tool’s bootloader or fastboot functions to enable ADB.

If ADB is not enabled, you can still proceed using fastboot mode with the tool.


🚀 Step 3: Use XTC 2 Tool to Remove FRP (No SIM/Plug)

XTC CLIP HTC FRP bypass tool download

  1. Boot your HTC into Fastboot Mode:
    Power off the phone, then press and hold Volume Down + Power.
  2. Connect the phone via USB to the PC.
  3. Open XTC 2 Tool.
  4. Under FRP tab, select the correct model (or use “AUTO”).
  5. Click on “Remove FRP (No SIM/No Plug)” option.
  6. Wait for the process to finish — the tool will reboot the mobile and FRP will be removed.

🧼 Optional Clean-Up

  • After FRP is removed, factory reset the phone to avoid any residual settings.
  • Update to latest firmware (optional).

🛠️ Troubleshooting

  • If phone is not detected: Reinstall HTC drivers and enable “USB Debugging.”
  • If FRP removal fails: Make sure your XTC 2 Dongle license is active, and the phone is supported.

FRP removal tool XTC CLIP HTC frp bypass tool download we have available two versions of xtc2tool 1.32.setup and XTC 2 Tool 1.27 both are using to bypass HTC FRP lock. It help to set your device on debugging mode while lock locked.

XTC 2 Tool for HTC frp bypass tool download
Avatar for Pangu

About Pangu

mobile software engineer with over 8 years of hands-on experience in firmware flashing, software repair, and mobile unlocking. Since 2017, I have authored, tested, and published numerous article and tutorials About Me: https://pangu.in/about-me/

View all posts by Pangu →

Leave a Reply

Your email address will not be published. Required fields are marked *